bet3365娱乐场手机版-bet28365官网手机版

您好,欢迎来到中国企业库   [请登陆]  [免费注册]
小程序  
APP  
微信公众号  
手机版  
 [ 免责声明 ]     [ 举报 ]
企业库
bet3365娱乐场手机版-bet28365官网手机版 搜企业
客服电话:400-000-8722
bet3365娱乐场手机版 资讯 黄页 灯饰 服装 招商 招聘 企业级商城
企业库首页>资讯
行业
广告

Machine Tool Guideway knowledge Learning

编辑:Zhongshan Arify Automation Equipment Co., ltd. 来源:yalifeien 发布时间:2021-09-14 浏览:27

A guideway is one of the important elements of the machine tool. The main function of the guideway is to make sure that the cutting tool or machine tool operative element moves along a predetermined path. The machine tool operative element carries a workpiece along with it. The motion is generally circular for boring mills, vertical lathe, etc. while it is a straight line for lathe, drilling, boring machines, etc.

The purpose of the guideway (or slideway) is to accommodate the axial movement of the machine slides, worktables, and spindles. The guideway also provides the geometric alignment (parallelism, perpendicularity, roll, pitch, and yaw) for the axis. The surface must support the static and dynamic loads (including machining forces) with as little friction as possible, but at the same time dampen the effect of a movable joint on the machine.

The design of machine tool elements is critical in tool engineering. They must withstand against an applied external load. Requirements, functions, and types of guideways are also explained.

Functions of guideways

i. To have low friction as compared to slideways
ii. Should have uniformity of motion even at slow speeds.
iii. Should have high stiffness if the rolling members are preloaded.
iv. Possibility of using the high velocity of motion.

Requirements of guideways

i. It should be strong
ii. It should process sufficient stiffness
iii. There should be less wear
iv. The pressure distribution should be uniform.
v. It should provide good guidance
vi. There should be less friction.

Standard Guideway Geometries

The guideway configurations or geometries most commonly used are:

1. Round Limited used on surface grinders as well as feeding spindle bars (e.g. boring mill).

2. Flat This guideway is used for alignment only – normally outboard from the machine’s spindle. Found on a wide range of machines including grinding machines.

3. Vee Cylindrical grinders may have vee ways. They are outboard from the grinding wheel and are used primarily for alignment.

4. Dovetail This guideway is seldom seen on today’s machine tools. However, it has some applications in tool slides (e.g. gang tool slide on a Swiss-type turning machine). It features extremely good rigidity and alignment characteristics. It is an expensive guideway to produce.

5. Box (square/rectangular) This is a common guideway on machining centers and lathes. It is used in heavy machining (e.g. milling) applications. The box can either be a bolted-on steel rail or an integral part of the machine’s casting. When they are integral, the cast-iron surface is flame or induction heat-treated and then ground and/or hand scraped.

6. Ball or roller Prepackaged ball and roller packs can be purchased in a variety of sizes and ratings for general application on a wide range of machine guideways.

TYPES OF GUIDEWAYS

The guideways are mainly classified according to the nature of friction between contacting surfaces of the operative element :
(a) Guideways with sliding friction
(b) Guideways with rolling friction

The most commonly used shapes of guiding elements of slideways are:

(i) V-type

(ii) Flat type

(iii) Dovetail type

(iv) Circular or cylindrical type.

Vee or Inverted Vee Guideways:

  • These are widely used on machine tools, especially on lathe beds.
  • The advantage of this is that parallel alignment-of the guideway with the spindle axis is not affected by wear. There is a closing action as the upper member settles on the lower member, and this automatically maintains the alignment.
  • Jibs are, therefore, not required with the vee guideway to take up the clearance caused by the wear.

Flat and Dovetail Guideways:

  • Flat or dovetail forms are used on CNC machine tools.
  • The flat guideways have better load- bearing capabilities than the other guideways.
  • After a period of use, wearing may occur owing to the sliding of the surfaces over each other. Jibs are used to ensure accurate fitting of the slide to both the flat and dovetail guideways.
  • The jibs are tapered and can be adjusted to reduce excessive clearance caused by wear.
  • The metal-to-metal contact on the vee, flat, and dovetail types of the guideway is normally cast iron to cast iron.
  • The cast iron may be heat-treated to increase its hardness, and the surface ground to obtain the required accuracy.

Cylindrical guideways:

  • In cylindrical guideways, the bore in the carriage housing provides support all around the guideway.
  • For relatively short traverses and light loads, cylindrical guideways are very efficient.
  • A limitation on the use of these guideways for long traverses is that if the guide bar is supported only at each end, it may sag or bend in the center of the span under a load.

Antifriction Linear Motion (LM) Guideways:

Antifriction linear motion guideways are used on CNC machine tools to:

(a) Reduce the amount of wear
(b) Improve the smoothness of the movement
(c) Reduce friction
(d) Reduce heat generation.

  • They use rolling elements between the moving and the stationary elements of the machine.

These are Guideways with Rolling Friction.
Advantages over conventional guideways.
1. Low friction as compared to slideways
2. Uniformity of motion even at slow speeds due to the virtual absence of the stick-slip phenomenon.
3. High stiffness if the rolling members are preloaded, and
4. Possibility of using high velocities of motion.

  • The main disadvantage of these guideways as compared to friction guideways is their lower damping capacity.

Stick-slip phenomena in machine tool guideways

  • In a machine tool either the table holding the workpiece or the saddle holding the cutting tool moves very slowly over suitable guides and at the same time is subjected to heavy forces caused by cutting and clamping. In such sliding cases often a time-dependent intermittent motion is noted which causes consecutive sticking and slipping of the slide at regular intervals. This regularly repeated motion is known as stick-slip motion.
  • This stick-slip motion when exits is found to worsen surface finish and dimensional accuracy of the product and also reduces the overall life of the machine tool and the cutting tools.
  • Therefore for satisfactory machining performance, it is essential to eliminate or reduce the stick-slip motion. This requires being acquainted with the stick-slip characteristics and the role of various parameters on it.
  • The principle agents which are responsible for stick-slip motion under low speed and large forces are the elasticity of the sliding elements and the frictional characteristics at the sliding surfaces.

Advantages of Linear Motion Guideways :

Following are the advantages of LM Guideways due to which their demand for high precision work is increasing:

1. High Positional Accuracy – When a load is driven by an LM guideway, the frictional contact between load and bed desk is rolling contact. The coefficient of friction is only 1/50 of traditional contact.

2. Long Life with high motion Accuracy – With a traditional slide, errors in accuracy are caused by the counter flow of oil film. Insufficient lubrication causes wear between the contact surfaces. In contrast, rolling contact has little wear, therefore machines can achieve a long life with motion accuracy.

3. High-speed motion is possible with the low driving force LM Guideways have little frictional resistance, only a small force is required to move a load.
4. Equal loading capacity in all directions LM Guideways can take the load in either vertical or horizontal directions.
5. Easy Installation – Installing a Linear Guideway is quite easy. Grinding or Milling the machine surface, following the recommended installation procedure, and tightening the bolts to the required torque can achieve highly accurate linear motion.
6. Easy Lubrication
7. Interchangeability


慎重声明:资讯 【Machine Tool Guideway knowledge Learning】由 Zhongshan Arify Automation Equipment Co., ltd. 发布,版权归原编辑及其所在单位,其原创性以及文中陈述文字和内容未经(企业库www.qiyeku.com)证实,请读者仅作参考,并请自行核实相关内容。若本文有侵犯到您的版权, 请你提供相关证明及申请并与大家联系(qiyeku # qq.com)或【在线投诉】,大家审核后将会尽快处理。
会员咨询QQ群:902340051 入群验证:企业库会员咨询.
马上登陆 免费注册只需30秒,立即尊享
免费开通旗舰型网络商铺
免费发布无限量供求信息
每天查看30万求购信息
bet3365娱乐场手机版 资讯 黄页 贴吧 灯饰 服装 招商 招聘
会员地图 产品地图 资讯地图 黄页地图 渠道合作 会员服务 广告服务 联系大家
中山市八喜电脑网络有限企业版权所有 © 2006-2021     客服:0760-23776398      免责声明     举报     平台资质

bet3365娱乐场手机版|bet28365官网手机版

XML 地图 | Sitemap 地图